PoE Switch NSW2010-10T-POE-IN

• Multiple working modes to address your business needs: Default(Normal mode), VLAN(Secure mode), EXTEND(Surveillance mode)
• Support port traffic control
• Support for secure mode, all downlink ports can communicate only with uplink ports
• Up to 250m transmission distance on surveillance mode
• Support buffer optimization
• All metal housing, safe and reliable

Hardware Specification

Ports Type 10×100Mbps network ports (RJ45), including 8 PoE ports

Forwarding performance 1.49Mpps

Standards IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at

Switching capacity 2 Gbps

Packet Buffer 1.625 M bit

MAC 4K

Power supply AC: 100-240 V, 50/60 Hz

Max. PoE Power Max capacity: 120 W, Max capacity for single port: 30 W

Cooling Fans 0

Mean Time Between Failure (MTBF) > 50000 hours

Weight <1.22 kg

Operating humidity 10%～90% (non-condensing)

Storage humidity 5%～90% (non-condensing)

Operating temperature 0 ℃ to 40 ℃ (32 ℉ to 104 ℉)

Storage Temperature -40 ℃ to 70 ℃

Dimensions (W×D×H) 220mm x 150mm x 44mm(8.7"×5.9"×1.7")

Working Mode Default (Normal mode) : All ports can communicate with each other, EXTEND (Surveillance mode): Transmission distance up to 250 meters

Indicator POWER Steady on: AC input is normal, POWER Off: No AC input, PoE Off: No PoE power supply, PoE Steady on: PoE power supply is normal, LINK/ACT Off: No link, LINK/ACT Steady on: Linked, LINK/ACT Flashing: Transmitting data, Speed Off: Linked at 10/100 Mbps, Speed On: Linked at 1000 Mbps